ADA4807-1AKSZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4807 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 950μA |
| Output Current | 60mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 225V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 1.2μA |
| Max Input Voltage | 11V |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 180MHz |
| Gain Bandwidth Product | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 5.5V |
| Current - Output / Channel | 106mA |
| Max Frequency | 100kHz |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Height | 1.1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4807-1AKSZ-R2 Overview
The linear amplifier is packaged in a 6-TSSOP, SC-88, SOT-363 case. This is a Voltage Feedback type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 6. The pins on this board total to 6 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 6 pins on this chip. There is an input offset voltage of 20μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Operational amplifier can operate supply current at 950μA. There should be no change in the voltage gain at 130dB. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
ADA4807-1AKSZ-R2 Features
6 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4807-1AKSZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4807-1AKSZ-R2 Instrumentational OP Amps applications.
- Weighing systems
- High speed sample
- Laptop
- Large motor controllers
- Logarithmic operation circuits
- Video data acquisition
- Vehicle electronics
- Industrial control system
- Thermocouples
- Information processing
