ADA4807-2ACPZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4807 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 950μA |
| Output Current | 60mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 145V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 1.2μA |
| Max Input Voltage | 11V |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V |
| Output Current per Channel | 106mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 180MHz |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 1.6μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 170MHz |
| Max Frequency | 100kHz |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Height | 800μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4807-2ACPZ-R2 Overview
A 10-VFDFN Exposed Pad, CSP case is used to package the op amp. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 10h termination of the year. Buffer amplifier has a total of 10 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 10 pins on it. In terms of input offset voltage, operational amplifier rates 20μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 950μA, this op amp ic can operate. You should keep the voltage gain at 130dB for the time being. A linear amplifier like this has 2 circuits on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
ADA4807-2ACPZ-R2 Features
10 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4807-2ACPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4807-2ACPZ-R2 Instrumentational OP Amps applications.
- Vehicle electronics
- Portable electronic products powered by batteries
- Power generator
- Addition operation circuits
- Non-polarized electrodes
- Integrator circuits
- pH (acidity)
- E-book readers
- Switching amplifier
- Precision measurement
