ADA4807-2ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4807 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 950μA |
| Slew Rate | 145V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 1.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V |
| Output Current per Channel | 106mA |
| Input Offset Voltage (Vos) | 20μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 1.6μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 170MHz |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Height Seated (Max) | 0.85mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4807-2ACPZ-R7 Overview
Op amp is packaged in 10-VFDFN Exposed Pad, CSP case. A Voltage Feedback-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 10. A total of 10 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 10 pins are available on the instrumentation amplifier. Op amp ic rates 20μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A supply current of 950μA can be used to operate this linear amplifier. Maintain 130dB as the voltage gain. A instrumentation amplifier like this has 2 circuits. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
ADA4807-2ACPZ-R7 Features
10 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4807-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4807-2ACPZ-R7 Instrumentational OP Amps applications.
- Digital cameras
- Multimedia playback equipment
- Measurements of Wheatstone bridge
- Automatic control
- Wireless base stations
- Hand-held batteries
- Proportional operation circuits
- single/dual op amp sum and difference circuits
- Tablets
- MP3
