ADA4807-4ARUZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4807 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 1mA |
| Slew Rate | 225V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 1.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 140μV |
| Gain Bandwidth Product | 170MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 1.6μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| -3db Bandwidth | 180MHz |
| Dual Supply Voltage | 5V |
| Height Seated (Max) | 1.05mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4807-4ARUZ-R7 Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. In terms of input offset voltage, operational amplifier rates 140μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 1mA . 130dB should be the voltage gain. There are 4 circuits on op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.
ADA4807-4ARUZ-R7 Features
14 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4807-4ARUZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4807-4ARUZ-R7 Instrumentational OP Amps applications.
- Automotive sensors
- Car stereo
- Home audio systems
- Polarized electrodes
- Communication device
- Exponential operation circuits
- Fast A/D and D/A converters
- Digital cameras
- High input resistance broadband
- Portable docking station
