ADA4817-1ACPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4817 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Operating Supply Current | 19mA |
| Nominal Supply Current | 21mA |
| Quiescent Current | 21mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.05 GHz |
| Gain Bandwidth Product | 410MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | 63dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Height | 850μm |
| Length | 3.85mm |
| Width | 2.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-1ACPZ-R2 Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad, CSP case. Voltage Feedback-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. Op amp rates 2mV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . This op amp can operate from a supply current at 19mA. It is recommended to keep the voltage gain at 63dB at all times. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 9V. It is used TAPE AND REEL to pack the op amps. FastFET? corresponds to the op amp's series. As a result, linear amplifier's quiescent current is 21mA.
ADA4817-1ACPZ-R2 Features
8 Pins
supply voltage of 5V
63dB voltage gain
ADA4817-1ACPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4817-1ACPZ-R2 Instrumentational OP Amps applications.
- Industrial applications including automation
- Video amplifiers
- Digital cameras
- Signal filtering
- High gain DC amplifier
- Blood pressure sensors
- Voltage regulation circuit
- Power transmission
- Video conversion and routing
- Weighing systems
