ADA4817-1ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Supplier Device Package | 8-LFCSP-WD (3x3) |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Base Part Number | ADA4817 |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 21mA |
| Nominal Supply Current | 21mA |
| Output Current | 70mA |
| Quiescent Current | 21mA |
| Current - Supply | 19mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.05 GHz |
| Gain Bandwidth Product | 410MHz |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | -72dB |
| Voltage - Input Offset | 400μV |
| Settling Time | 9 ns |
| Current - Output / Channel | 40mA |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 1.05GHz |
| Min Dual Supply Voltage | 2.5V |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Number of Amplifiers | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-1ACPZ-R7 Overview
In the package, you will find a 8-WFDFN Exposed Pad, CSP-case to contain the op amp ic. Op amps are Voltage Feedback types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. 8 pins are included on the operational amplifiers. Op amp rates 2mV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . A supply current of 21mA can be used to operate this linear amplifier. Voltage gain should remain at 63dB. The buffer amp consists of 1 circuits in total. Instrumentation amplifier has 1 channels on it. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. A temperature greater than 105°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 9V voltage. It is recommended that you use an 19mA power supply with this electrical part in order for it to operate correctly. With regard to the supply voltage, this electrical component is capable of working from under 10V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 5V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 5V. FastFET? corresponds to linear amplifier's series. The quiescent current is 21mA. The linear amplifier has 1 amplifiers.
ADA4817-1ACPZ-R7 Features
63dB voltage gain
ADA4817-1ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4817-1ACPZ-R7 Instrumentational OP Amps applications.
- Hand-held batteries
- Car stereo
- Gaming industry
- Video conversion and routing
- Inverse/same-phase proportional circuit
- Test and measurement instruments
- Power control
- High input resistance broadband
- High-frequency data acquisition systems
- Polarized electrodes
