ADA4817-1ARDZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4817 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 21mA |
| Nominal Supply Current | 21mA |
| Output Current | 70mA |
| Quiescent Current | 21mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.05 GHz |
| Gain Bandwidth Product | 410MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | -72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Settling Time | 9 ns |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Height | 900μm |
| Length | 3.25mm |
| Width | 3.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-1ARDZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case is used. An op amp ic of the Voltage Feedback type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . Using a supply current of 21mA , this buffer op amp will be able to operate. You should keep the voltage gain at 63dB for the time being. 1 channels are available on the instrumentation amplifier. Instrumentation amplifiers are numbered by their FastFET? series. The quiescent current is 21mA.
ADA4817-1ARDZ Features
8 Pins
supply voltage of 5V
63dB voltage gain
ADA4817-1ARDZ Applications
There are a lot of Analog Devices Inc. ADA4817-1ARDZ Instrumentational OP Amps applications.
- Gaming industry
- Automatic control
- High speed sample
- Inverse/same-phase proportional circuit
- Power generator
- Exponential operation circuits
- Weak signal detection
- Instrumentation
- Professional videography
- ECG equipment
