ADA4817-2ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4817 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 42mA |
| Nominal Supply Current | 42mA |
| Output Current | 70mA |
| Quiescent Current | 21mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.05 GHz |
| Gain Bandwidth Product | 410MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | -72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Settling Time | 9 ns |
| Low-Bias | YES |
| Micropower | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Height | 900μm |
| Length | 3.25mm |
| Width | 2.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-2ACPZ-R7 Overview
The linear amplifier is packaged in a 16-WQFN Exposed Pad, CSP case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. The total number of pins on linear amplifier is 16. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 16 pins are available on the instrumentation amplifier. There is an input offset voltage of 2mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . As long as the supply current of the chip does not exceed 42mA, this op amp ic can operate. Voltage gain should remain at 63dB. Op amp ic has 2 channels. The operating supply voltage of the buffer op amp is rated at 9V. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. FastFET? corresponds to the op amp's series. There is an 21mA quiescent current running through op amp ic.
ADA4817-2ACPZ-R7 Features
16 Pins
supply voltage of 5V
63dB voltage gain
ADA4817-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4817-2ACPZ-R7 Instrumentational OP Amps applications.
- High speed sample
- Commercial audio systems
- RF cable systems
- Radar
- Computer workstations
- Tablets
- Thermocouples
- Home audio systems
- Communication device
- Scintillation detectors
