ADA4817-2ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4817 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 42mA |
| Nominal Supply Current | 42mA |
| Output Current | 70mA |
| Quiescent Current | 21mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 410MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | -72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Settling Time | 9 ns |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 1.05GHz |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Wideband | YES |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-2ACPZ-RL Overview
It is packaged in an 16-WQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. Op amps are Voltage Feedback types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 16. In total, there are 16 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 16 pins are located on the operational amplifiers. The input offset voltage is 2mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~105°C. Using a supply current of 42mA , this buffer op amp will be able to operate. Op amp is a member of the 63dB's 63dB family. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 9V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. The FastFET? indicates the series number of the op amp. As a result, linear amplifier's quiescent current is 21mA.
ADA4817-2ACPZ-RL Features
16 Pins
supply voltage of 5V
63dB voltage gain
ADA4817-2ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4817-2ACPZ-RL Instrumentational OP Amps applications.
- High gain DC amplifier
- Communication device
- Signal transformation
- Fission chambers
- Automatic control
- Power generator
- Tablets
- Car stereo
- Communication
- Gaming industry
