ADA4841-1YRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4841 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 13V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 124dB |
| Average Bias Current-Max (IIB) | 5.3μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 40μV |
| Settling Time | 1 μs |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 5.3μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4841-1YRZ Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Voltage Feedback-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 300μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.5mA . 124dB should remain the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are a total of 1 elements in this linear amplifier. Currently, linear amplifier is operating with a quiescent current of 1.2mA.
ADA4841-1YRZ Features
8 Pins
supply voltage of 5V
124dB voltage gain
Output Type: Rail-to-Rail
ADA4841-1YRZ Applications
There are a lot of Analog Devices Inc. ADA4841-1YRZ Instrumentational OP Amps applications.
- Medical instruments
- Active probe
- Large motor controllers
- Medical imaging
- Differentiator circuits
- Portable electronic products powered by batteries
- Video amplifiers
- Tablets
- Video data acquisition
- Television
