ADA4841-2YRZ-R7
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 124dB |
| Average Bias Current-Max (IIB) | 5.3μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 40μV |
| Settling Time | 650 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Bias Current-Max (IIB) @25C | 5.3μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4841 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Output Current | 30mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 13V/μs |
| Amplifier Type | Voltage Feedback |
ADA4841-2YRZ-R7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. This is a Voltage Feedback type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 300μV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 3mA and 10 . You should keep the voltage gain at 124dB for the time being. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. TAPE AND REEL is adopted to pack the instrumentation amplifier. Buffer amplifier has a quiescent current of 1.2mA.
ADA4841-2YRZ-R7 Features
8 Pins
supply voltage of 5V
124dB voltage gain
Output Type: Rail-to-Rail
ADA4841-2YRZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4841-2YRZ-R7 Instrumentational OP Amps applications.
- Test equipment
- Navigation
- Non-polarized electrodes
- RF cable systems
- Measurements of Wheatstone bridge
- Information processing
- Inverse/same-phase proportional circuit
- E-book readers
- Power control
- Mobile phone
