ADA4851-1WYRJZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | ADA4851 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 3.2mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Average Bias Current-Max (IIB) | 4.5μA |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Input Capacitance | 1.2pF |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-1WYRJZ-R7 Overview
The linear amplifier is packaged in a SOT-23-6 case which makes it easy for the consumer to handle. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 6h termination of the year. Buffer amplifier has a total of 6 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 6 pins on it. Op amp rates 3.5mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 3.2mA . You should keep the voltage gain at 107dB for the time being. As far as the device is concerned, buffer amplifier has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The Automotive represents the op amp's series number. Currently, linear amplifier is operating with a quiescent current of 3.2mA.
ADA4851-1WYRJZ-R7 Features
6 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-1WYRJZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4851-1WYRJZ-R7 Instrumentational OP Amps applications.
- Test and measurement instruments
- earphone
- Portable docking station
- Ultrasound transducers
- Precision measurement
- Television broadcasting equipment
- Addition operation circuits
- Hand-held batteries
- Portable media players
- pH (acidity)
