ADA4851-2YRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4851 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 6.4mA |
| Nominal Supply Current | 6.4mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Average Bias Current-Max (IIB) | 4.5μA |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-2YRMZ Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. The instrumentation amplifier in this picture is of the Voltage Feedback-type. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 3.5mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 6.4mA , this buffer op amp will be able to operate. Keeping the voltage gain at 107dB is the best course of action. Instrumentation amplifier has 2 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Currently, linear amplifier is operating with a quiescent current of 3.2mA.
ADA4851-2YRMZ Features
8 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-2YRMZ Applications
There are a lot of Analog Devices Inc. ADA4851-2YRMZ Instrumentational OP Amps applications.
- Portable media players
- Precision measurement
- Medical imaging
- pH (acidity)
- Television
- High-frequency data acquisition systems
- High speed sample
- Multiplication circuits
- Automatic control
- Video amplifiers
