ADA4851-2YRMZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4851 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 6.4mA |
| Nominal Supply Current | 6.4mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Average Bias Current-Max (IIB) | 4.5μA |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Input Capacitance | 1.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-2YRMZ-RL7 Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Voltage Feedback-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. There is an input offset voltage of 3.5mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 6.4mA . There should be no change in the voltage gain at 107dB. There are a total of 2 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The quiescent current is 3.2mA.
ADA4851-2YRMZ-RL7 Features
8 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-2YRMZ-RL7 Applications
There are a lot of Analog Devices Inc. ADA4851-2YRMZ-RL7 Instrumentational OP Amps applications.
- High input resistance broadband
- Differentiator circuits
- Band-pass filter
- Medical instruments
- Power control
- Vehicle electronics
- Weak signal detection
- Video computer boards
- Division circuits
- Signal operation
