ADA4851-4YRUZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4851 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 12.8mA |
| Nominal Supply Current | 12.8mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-4YRUZ-RL Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. Op amps are Voltage Feedback types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. In total, there are 14 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 12.8mA . Keeping the voltage gain at 107dB is the best course of action. There are a total of 4 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. 3.2mA quiescent currents are flowing through buffer op amp.
ADA4851-4YRUZ-RL Features
14 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-4YRUZ-RL Applications
There are a lot of Analog Devices Inc. ADA4851-4YRUZ-RL Instrumentational OP Amps applications.
- Switching amplifier
- Non-polarized electrodes
- High input resistance broadband
- Division circuits
- High/low-pass filter circuit
- Band-stop filter
- Digital cameras
- Instrumentation
- Video data acquisition
- Differentiator circuits
