ADA4851-4YRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4851 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 12.8mA |
| Nominal Supply Current | 12.8mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-4YRUZ-RL7 Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . You can run this op amp ic on 12.8mA . You should keep the voltage gain at 107dB for the time being. Instrumentation amplifier has 4 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The quiescent current is 3.2mA.
ADA4851-4YRUZ-RL7 Features
14 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-4YRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADA4851-4YRUZ-RL7 Instrumentational OP Amps applications.
- Thermocouples
- Polarized electrodes
- Weak signal detection
- Displayers for aircraft and air transportation control systems
- Switching amplifier
- Power generator
- Cinema or auditorium audio system
- Multimedia playback equipment
- Digital cameras
- Portable docking station
