ADA4855-3YCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4855 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 3 |
| Operating Supply Current | 7.8mA |
| Nominal Supply Current | 7.8mA |
| Output Current | 40mA |
| Quiescent Current | 7.8mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 3.8μA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 400MHz |
| Gain Bandwidth Product | 200MHz |
| Voltage Gain | 92dB |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1.3mV |
| -3db Bandwidth | 410MHz |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4855-3YCPZ-R7 Overview
The linear amplifier is packaged in a 16-WQFN Exposed Pad, CSP case which makes it easy for the consumer to handle. Op amps are Voltage Feedback types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 16h termination of the year. A total of 16 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 3.3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 16 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~105°C. This op amp can operate from a supply current at 7.8mA. You should keep the voltage gain at 92dB for the time being. On the buffer amps, there are 3 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result, linear amplifier's quiescent current is 7.8mA.
ADA4855-3YCPZ-R7 Features
16 Pins
supply voltage of 3.3V
92dB voltage gain
Output Type: Rail-to-Rail
ADA4855-3YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4855-3YCPZ-R7 Instrumentational OP Amps applications.
- Video computer boards
- Oscilloscopes
- High/low-pass filter circuit
- Portable electronic products powered by batteries
- Signal transformation
- Precision measurement
- Power transmission
- Automotive sensors
- Video conversion and routing
- Signal operation
