ADA4857-1YCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4857 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 50mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~10.5V ±2.25V~5.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 850MHz |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 850000 kHz |
| Voltage Gain | 57dB |
| Average Bias Current-Max (IIB) | 3.3μA |
| Power Supply Rejection Ratio (PSRR) | -62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 2mV |
| Settling Time | 15 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3.3μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4857-1YCPZ-R7 Overview
The linear amplifier is packaged in a 8-VFDFN Exposed Pad, CSP case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Voltage Feedback-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 4.5mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . You can run this op amp ic on 5.5mA . There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 10V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The current is quiescent at 5.5mA.
ADA4857-1YCPZ-R7 Features
8 Pins
supply voltage of 5V
57dB voltage gain
ADA4857-1YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4857-1YCPZ-R7 Instrumentational OP Amps applications.
- Division circuits
- Car stereo
- Power generator
- Inverse/same-phase proportional circuit
- Thermocouples
- Communication device
- Biopotential
- Computer workstations
- Active probe
- Differentiator circuits
