ADA4857-1YRZ-RL
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | ADA4857 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 50mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~10.5V ±2.25V~5.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 850MHz |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 750000 kHz |
| Voltage Gain | 57dB |
| Average Bias Current-Max (IIB) | 3.3μA |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Settling Time | 15 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3.3μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
ADA4857-1YRZ-RL Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Voltage Feedback-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 2mV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. This op amp can operate from a supply current at 5mA. The voltage gain should stay at 57dB. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 10V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. Buffer amplifier has a quiescent current of 5.5mA.
ADA4857-1YRZ-RL Features
8 Pins
supply voltage of 5V
57dB voltage gain
ADA4857-1YRZ-RL Applications
There are a lot of Analog Devices Inc. ADA4857-1YRZ-RL Instrumentational OP Amps applications.
- Signal filtering
- Navigation
- Displayers for aircraft and air transportation control systems
- ECG equipment
- Fission chambers
- Fast A/D and D/A converters
- Polarized electrodes
- Home audio systems
- Test and measurement instruments
- Oscilloscopes
