ADA4857-2YCPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4857 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 11mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~10.5V ±2.25V~5.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595000 kHz |
| Voltage Gain | 57dB |
| Average Bias Current-Max (IIB) | 3.3μA |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 850MHz |
| Bias Current-Max (IIB) @25C | 3.3μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Wideband | YES |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4857-2YCPZ-R2 Overview
There is a 16-VQFN Exposed Pad, CSP case in which the instrumentation amplifier is packaged. A Voltage Feedback-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 16 pins on it. The input offset voltage is 2mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~125°C. This op amp can operate from a supply current at 5mA. 57dB should remain the voltage gain. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. There is a quiescent current of 5.5mA in this operational amplifier circuit.
ADA4857-2YCPZ-R2 Features
16 Pins
supply voltage of 5V
57dB voltage gain
ADA4857-2YCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4857-2YCPZ-R2 Instrumentational OP Amps applications.
- Medical imaging
- Vehicle electronics
- RF cable systems
- Radar
- Biopotential
- Proportional counter tubes
- Signal filtering
- Strain gauges
- Wireless base stations
- High/low-pass filter circuit
