ADA4857-2YCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4857 |
| Pin Count | 16 |
| Operating Supply Voltage | 10V |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 50mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~10.5V ±2.25V~5.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 850MHz |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595000 kHz |
| Voltage Gain | 57dB |
| Average Bias Current-Max (IIB) | 3.3μA |
| Power Supply Rejection Ratio (PSRR) | -62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 2mV |
| Settling Time | 15 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3.3μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Height | 950μm |
| Length | 4mm |
| Width | 3.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4857-2YCPZ-R7 Overview
It is packaged in an 16-WQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. This is a Voltage Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 16 mark. A total of 16 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 16-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 11mA. The voltage gain should stay at 57dB. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 10V. The instrumentation amplifier is packed in the form of TAPE AND REEL. Buffer amplifier has a quiescent current of 5.5mA.
ADA4857-2YCPZ-R7 Features
16 Pins
supply voltage of 5V
57dB voltage gain
ADA4857-2YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4857-2YCPZ-R7 Instrumentational OP Amps applications.
- Video amplifiers
- Multimedia playback equipment
- Logarithmic operation circuits
- Instrumentation
- Exponential operation circuits
- Gaming industry
- ECG equipment
- Biopotential
- Vehicle electronics
- Blood pressure sensors
