ADA4857-2YCPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4857 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 50mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~10.5V ±2.25V~5.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 750MHz |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595000 kHz |
| Voltage Gain | 57dB |
| Average Bias Current-Max (IIB) | 3.3μA |
| Power Supply Rejection Ratio (PSRR) | -62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 2mV |
| Settling Time | 15 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 850MHz |
| Bias Current-Max (IIB) @25C | 3.3μA |
| Programmable Power | NO |
| Input Capacitance | 2pF |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4857-2YCPZ-RL Overview
It is packaged in an 16-WQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp ic of the Voltage Feedback type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 16 terminations. Buffer amplifier has a total of 16 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 16 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 4.5mV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 11mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 57dB at all times. Instrumentation amplifier has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 10V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 5.5mA.
ADA4857-2YCPZ-RL Features
16 Pins
supply voltage of 5V
57dB voltage gain
ADA4857-2YCPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4857-2YCPZ-RL Instrumentational OP Amps applications.
- Power transmission
- Car stereo
- Displayers for aircraft and air transportation control systems
- Multimedia playback equipment
- Tablets
- High/low-pass filter circuit
- Automation control systems
- Thermocouples
- Communication device
- Ultrasound transducers
