ADA4860-1YRJZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4860 |
| Pin Count | 6 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 8mA |
| Quiescent Current | 8mA |
| Slew Rate | 980V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 13mV |
| Bandwidth | 520MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Voltage - Input Offset | 3.5mV |
| Settling Time | 8 ns |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 4nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4860-1YRJZ-RL7 Overview
A SOT-23-6 case is used to package the op amp. An op amp ic of the Current Feedback type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 6 mark. It consists of a total of 6 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 13mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~105°C. As long as the supply current of the chip does not exceed 8mA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 9V voltage. The current is quiescent at 8mA.
ADA4860-1YRJZ-RL7 Features
6 Pins
supply voltage of 5V
ADA4860-1YRJZ-RL7 Applications
There are a lot of Analog Devices Inc. ADA4860-1YRJZ-RL7 Instrumentational OP Amps applications.
- Computer workstations
- pH (acidity)
- Scintillation detectors
- Biopotential
- Video data acquisition
- Automotive sensors
- Home audio systems
- Signal transformation
- Information processing
- Thermocouples
