ADA4861-3YRZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4861 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 3 |
| Operating Supply Current | 20.5mA |
| Nominal Supply Current | 20.5mA |
| Output Current | 25mA |
| Quiescent Current | 6.83mA |
| Slew Rate | 910V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | -56.5 dB |
| Current - Input Bias | 2.9μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 100μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Settling Time | 12 ns |
| -3db Bandwidth | 370MHz |
| Input Capacitance | 1.5pF |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4861-3YRZ-RL7 Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Current Feedback-type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 14. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 14 pins on this chip. The input offset voltage is 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~105°C. You can run this op amp ic on 20.5mA . 3 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 9V voltage. The quiescent current is 6.83mA.
ADA4861-3YRZ-RL7 Features
14 Pins
supply voltage of 5V
ADA4861-3YRZ-RL7 Applications
There are a lot of Analog Devices Inc. ADA4861-3YRZ-RL7 Instrumentational OP Amps applications.
- Signal filtering
- Video computer boards
- Commercial audio systems
- Television broadcasting equipment
- Power control
- Medical imaging
- Automotive sensors
- Video amplifiers
- Proportional operation circuits
- Industrial control system
