ADA4891-1WARJZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4891 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 4.4mA |
| Nominal Supply Current | 4.4mA |
| Quiescent Current | 4.4mA |
| Slew Rate | 210V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | -88 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 105MHz |
| Voltage Gain | 83dB |
| Power Supply Rejection Ratio (PSRR) | -65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 2.5mV |
| Settling Time | 28 ns |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 240MHz |
| Programmable Power | NO |
| Input Capacitance | 3.2pF |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4891-1WARJZ-R7 Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 5 terminations this year. Buffer amplifier has a total of 5 pins. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. You can run this op amp ic on 4.4mA . It is a member of the 83dB's 83dB family. The buffer amp consists of 1 circuits in total. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier is packaged by using a TAPE AND REEL axis. The Automotive stands for the buffer op amp's serial number. Buffer amplifier has a quiescent current of 4.4mA.
ADA4891-1WARJZ-R7 Features
5 Pins
supply voltage of 3V
83dB voltage gain
Output Type: Rail-to-Rail
ADA4891-1WARJZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4891-1WARJZ-R7 Instrumentational OP Amps applications.
- Signal amplification
- Test equipment
- Thermocouples
- Test and measurement instruments
- Strain gauges
- Automatic control
- Power generator
- ECG equipment
- Video data acquisition
- MP3
