ADA4891-4ARZ-RL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4891 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 17.6mA |
| Nominal Supply Current | 17.6mA |
| Quiescent Current | 4.4mA |
| Slew Rate | 210V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 105MHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 240MHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Input Capacitance | 3.2pF |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
ADA4891-4ARZ-RL Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 14-pin op amp ic is included in the package. The input offset voltage is 10mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 17.6mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 83dB at all times. Buffer op amp is equipped with 4 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 4.4mA quiescent current running through op amp ic.
ADA4891-4ARZ-RL Features
14 Pins
supply voltage of 3V
83dB voltage gain
Output Type: Rail-to-Rail
ADA4891-4ARZ-RL Applications
There are a lot of Analog Devices Inc. ADA4891-4ARZ-RL Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Communication
- Ultrasound transducers
- Television broadcasting equipment
- pH (acidity)
- High input resistance broadband
- Band-stop filter
- Addition operation circuits
- Radiation thermometry transducers
- PDA
