Parameters |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADA4896 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Number of Channels |
2 |
Operating Supply Current |
6mA |
Quiescent Current |
3mA |
Supply Current-Max |
6.4mA |
Slew Rate |
120V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
-120 dB |
Current - Input Bias |
11μA |
Voltage - Supply, Single/Dual (±) |
3V~10V ±1.5V~5V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
230MHz |
Gain Bandwidth Product |
90MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
230000 kHz |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
4μA |
Power Supply Rejection Ratio (PSRR) |
125dB |
Low-Offset |
YES |
Frequency Compensation |
NO |
Supply Voltage Limit-Max |
5.5V |
Voltage - Input Offset |
28μV |
Settling Time |
45 ns |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
-4μA |
Programmable Power |
NO |
Dual Supply Voltage |
3V |
Input Capacitance |
3pF |
Neg Supply Voltage-Max (Vsup) |
-5.5V |
Input Offset Current-Max (IIO) |
0.6μA |
Input Voltage Noise Density |
1nV/sqrt Hz |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
ADA4896-2ARMZ Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 500μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 6mA volt supply current is needed for this linear amplifier to operate. 110dB should be the voltage gain. There are a total of 2 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. There is a quiescent current of 3mA in this operational amplifier circuit.
ADA4896-2ARMZ Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4896-2ARMZ Applications
There are a lot of Analog Devices Inc. ADA4896-2ARMZ Instrumentational OP Amps applications.
- High gain DC amplifier
- Fast A/D and D/A converters
- Power control
- Gaming industry
- Biopotential
- Test equipment
- pH (acidity)
- Television broadcasting equipment
- Television
- Scintillation detectors