Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
ADA4897 |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Channels |
1 |
Operating Supply Current |
3mA |
Nominal Supply Current |
3mA |
Output Current |
80mA |
Quiescent Current |
3mA |
Slew Rate |
120V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
120 dB |
Current - Input Bias |
11μA |
Voltage - Supply, Single/Dual (±) |
3V~10V ±1.5V~5V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
230MHz |
Gain Bandwidth Product |
90MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
4μA |
Power Supply Rejection Ratio (PSRR) |
96dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
5.5V |
Voltage - Input Offset |
28μV |
Settling Time |
45 ns |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
4μA |
Programmable Power |
NO |
Dual Supply Voltage |
3V |
Input Capacitance |
3pF |
Neg Supply Voltage-Max (Vsup) |
-5.5V |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADA4897-1ARJZ-RL Overview
Op amp is packaged in SOT-23-6 case. Voltage Feedback-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. A total of 6 pins are located on this board. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 6 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 3mA . Maintain 110dB as the voltage gain. The op amp ic has 1 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. 3mA quiescent currents are flowing through buffer op amp.
ADA4897-1ARJZ-RL Features
6 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4897-1ARJZ-RL Applications
There are a lot of Analog Devices Inc. ADA4897-1ARJZ-RL Instrumentational OP Amps applications.
- Micro signal measurement
- E-book readers
- Vehicle electronics
- Signal operation
- Portable electronic products powered by batteries
- Ultrasound transducers
- Image computer boards
- Polarized electrodes
- Radar
- Computer workstations