ADA4897-1ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4897 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 3mA |
| Quiescent Current | 3mA |
| Supply Current-Max | 3.2mA |
| Slew Rate | 120V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 230MHz |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 28μV |
| Settling Time | 45 ns |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 10Hz |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Input Voltage Noise Density | 1nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4897-1ARZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called Voltage Feedback-types. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp rates 500μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 3mA, this op amp ic can operate. You should keep the voltage gain at 110dB for the time being. Buffer op amp is equipped with 1 channels on the device. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is an 3mA quiescent current running through op amp ic.
ADA4897-1ARZ Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4897-1ARZ Applications
There are a lot of Analog Devices Inc. ADA4897-1ARZ Instrumentational OP Amps applications.
- Industrial control system
- Power transmission
- High input resistance broadband
- Band-stop filter
- Car stereo
- Laptop
- Multimedia playback equipment
- Weighing systems
- Large motor controllers
- Communication device
