ADA4897-1ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4897 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Output Current | 80mA |
| Quiescent Current | 3mA |
| Slew Rate | 120V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 28μV |
| Settling Time | 45 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 230MHz |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4897-1ARZ-R7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 500μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 3mA and 10 . Voltage gain should remain at 110dB. Op amp ic has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. There is an 3mA quiescent current in linear amplifier.
ADA4897-1ARZ-R7 Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4897-1ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4897-1ARZ-R7 Instrumentational OP Amps applications.
- Television broadcasting equipment
- Digital cameras
- Vehicle electronics
- Proportional operation circuits
- High speed sample
- Navigation
- Division circuits
- Logarithmic operation circuits
- Tablets
- Weak signal detection
