ADA4897-2ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4897 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 6mA |
| Quiescent Current | 3mA |
| Supply Current-Max | 6.4mA |
| Slew Rate | 120V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 230MHz |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | YES |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 28μV |
| Settling Time | 45 μs |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | -4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 3pF |
| Input Offset Current-Max (IIO) | 0.6μA |
| Input Voltage Noise Density | 1nV/sqrt Hz |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4897-2ARMZ Overview
There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a Voltage Feedback-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 10. The total number of pins on linear amplifier is 10. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. 10 pins are available on the instrumentation amplifier. Op amp rates 500μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. A supply current of 6mA can be used to operate this linear amplifier. It is a member of the 110dB's 110dB family. Buffer op amp is equipped with 2 channels on the device. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. As a result, linear amplifier's quiescent current is 3mA.
ADA4897-2ARMZ Features
10 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4897-2ARMZ Applications
There are a lot of Analog Devices Inc. ADA4897-2ARMZ Instrumentational OP Amps applications.
- Mobile phone
- single/dual op amp sum and difference circuits
- PDA
- Video data acquisition
- Voltage regulation circuit
- Test and measurement instruments
- Micro signal measurement
- pH (acidity)
- Differentiator circuits
- Automation control systems
