ADA4897-2ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4897 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Output Current | 80mA |
| Quiescent Current | 3mA |
| Slew Rate | 120V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 28μV |
| Settling Time | 45 μs |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 230MHz |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 3pF |
| Wideband | YES |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4897-2ARMZ-R7 Overview
There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the Voltage Feedback type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 10 terminations in the next few months. There are a total of 10 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 10 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 6mA , this buffer op amp will be able to operate. Maintain 110dB as the voltage gain. Instrumentation amplifier has 2 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. There is an 3mA quiescent current running through op amp ic.
ADA4897-2ARMZ-R7 Features
10 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
ADA4897-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4897-2ARMZ-R7 Instrumentational OP Amps applications.
- Band-pass filter
- Hand-held batteries
- Blood pressure sensors
- Polarized electrodes
- Signal amplification
- High-frequency data acquisition systems
- Car stereo
- Semiconductor detectors
- Commercial audio systems
- RF cable systems
