ADA4898-2YRDZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4898 |
| Pin Count | 8 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 15.8mA |
| Nominal Supply Current | 15.8mA |
| Output Current | 40mA |
| Quiescent Current | 7.9mA |
| Slew Rate | 55V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -126 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~16.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 65MHz |
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 94dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | -107dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Settling Time | 85 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Input Capacitance | 2.5pF |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4898-2YRDZ-R7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width) Exposed Pad-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. The input offset voltage is 125μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~105°C. It is possible to operate this buffer amplifier from a supply current of 15.8mA . Maintain 94dB as the voltage gain. There are 2 channels on the operational amplifiers. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Currently, linear amplifier is operating with a quiescent current of 7.9mA.
ADA4898-2YRDZ-R7 Features
8 Pins
supply voltage of 5V
94dB voltage gain
ADA4898-2YRDZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4898-2YRDZ-R7 Instrumentational OP Amps applications.
- Communication
- Weighing systems
- Active probe
- Biopotential
- Inverse/same-phase proportional circuit
- Displayers for aircraft and air transportation control systems
- Strain gauges
- Portable media players
- Subtraction operation circuits
- Ultrasound transducers
