ADA4927-1YCPZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120kOhm |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4927 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 22.1mA |
| Nominal Supply Current | 20mA |
| Max Supply Current | 5mA |
| Quiescent Current | 20mA |
| Slew Rate | 5000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2.3 GHz |
| Gain Bandwidth Product | 2 GHz |
| Differential Output | YES |
| Voltage Gain | 0dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Settling Time | 10 ns |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Dual Supply Voltage | 5V |
| Interface Standard | GENERAL PURPOSE |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4927-1YCPZ-R2 Overview
The linear amplifier is packaged in a 16-VFQFN Exposed Pad, CSP case which makes it easy for the consumer to handle. Buffer amps of this type are called Current Feedback-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 16 terminations have been reported in the past few weeks. The pins on this board total to 16 in total. Linear amplifier includes 16 pins. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . It is possible to operate this buffer amplifier from a supply current of 22.1mA . Maintain 0dB as the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. The operating supply voltage of the buffer op amp is rated at 5V. 20mA quiescent currents are flowing through buffer op amp. 120kOhm should be the range of resistance for the linear amplifier. The interface IC of the electrical part is classified as LINE DRIVER.
ADA4927-1YCPZ-R2 Features
16 Pins
0dB voltage gain
Output Type: Differential
Resistance of 120kOhm
ADA4927-1YCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4927-1YCPZ-R2 Instrumentational OP Amps applications.
- Proportional counter tubes
- Instrumentation
- Video data acquisition
- Mobile phone
- PDA
- Logarithmic operation circuits
- Video amplifiers
- Differentiator circuits
- Thermocouples
- Voltage regulation circuit
