ADA4927-1YCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120kOhm |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4927 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Supply Current | 22.1mA |
| Quiescent Current | 20mA |
| Slew Rate | 5000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 2.3 GHz |
| Differential Output | YES |
| Voltage Gain | 0dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Output Polarity | COMPLEMENTARY |
| Voltage - Input Offset | 300μV |
| Settling Time | 10 ns |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Negative Supply Voltage-Nom | -5V |
| Out Swing-Min | 7.6 V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4927-1YCPZ-R7 Overview
Op amp is packaged in 16-VFQFN Exposed Pad, CSP case. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 16 terminations over the past year. In this case, there are 16 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. A total of 16 pins are present on the instrumentation amplifier. Op amp rates 300μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~105°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 22.1mA and 10 . There should be no change in the voltage gain at 0dB. Buffer amplifier produces Differential signals, which is one of its many benefits. For the operating supply voltage of the op amp ic, there is a rating of 1. As a result, linear amplifier's quiescent current is 20mA. It is important to keep the resistance within the 120kOhm range of the linear amplifier. Interface ICs of this electric part can be classified as LINE DRIVER types.
ADA4927-1YCPZ-R7 Features
16 Pins
supply voltage of 5V
0dB voltage gain
Output Type: Differential
Resistance of 120kOhm
ADA4927-1YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4927-1YCPZ-R7 Instrumentational OP Amps applications.
- Multiplication circuits
- Biopotential
- Power transmission
- pH (acidity)
- Industrial applications including automation
- single/dual op amp sum and difference circuits
- Image computer boards
- Test equipment
- Video data acquisition
- Radar
