ADA4927-2YCPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 120kOhm |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4927 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 11V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Supply Current | 22.1mA |
| Quiescent Current | 20mA |
| Slew Rate | 5000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 2.3 GHz |
| Differential Output | YES |
| Voltage Gain | 0dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Output Polarity | COMPLEMENTARY |
| Voltage - Input Offset | 300μV |
| Settling Time | 10 ns |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Negative Supply Voltage-Nom | -5V |
| Out Swing-Min | 7.6 V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4927-2YCPZ-RL Overview
Op amp is packaged in 24-WFQFN Exposed Pad, CSP case. Current Feedback-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 24 mark. The pins on this board total to 24 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 24 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 300μV voltage. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using an 22.1mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 0dB. On the output type, there are Differential different types of op amps. 2 elements make up the design of this buffer amplifier. As a result, linear amplifier's quiescent current is 20mA. Linear amplifier resistance should stay within the range of 120kOhm. This electronic part has a LINE DRIVER interface IC type.
ADA4927-2YCPZ-RL Features
24 Pins
supply voltage of 5V
0dB voltage gain
Output Type: Differential
Resistance of 120kOhm
ADA4927-2YCPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4927-2YCPZ-RL Instrumentational OP Amps applications.
- Large motor controllers
- Biopotential
- Inverse/same-phase proportional circuit
- Car stereo
- Radar
- Automatic control
- Signal operation
- Signal transformation
- Switching amplifier
- Commercial audio systems
