ADA4930-1YCPZ-R7
| Parameters | |
|---|---|
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4930 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Operating Supply Current | 34mA |
| Nominal Supply Current | 34mA |
| Slew Rate | 3400V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 23μA |
| Voltage - Supply, Single/Dual (±) | 3.3V 5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 1.35 GHz |
| Gain Bandwidth Product | 1.35 GHz |
| Differential Output | YES |
| Voltage Gain | 64dB |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3MOhm |
ADA4930-1YCPZ-R7 Overview
There is a 16-VFQFN Exposed Pad, CSP case package that contains the instrumentation amplifiers. An op amp of this type is a Differential-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 16 terminations. There are a total of 16 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 3.3V. 16 pins are included on the operational amplifiers. Op amp ic rates 150μV for input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~105°C . You can run this op amp ic on 34mA . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 3.3V voltage. Op amp resistance should stay within the range of 3MOhm. The interface IC of the electrical part is classified as LINE DRIVER.
ADA4930-1YCPZ-R7 Features
16 Pins
supply voltage of 3.3V
64dB voltage gain
Resistance of 3MOhm
ADA4930-1YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4930-1YCPZ-R7 Instrumentational OP Amps applications.
- Signal transformation
- Industrial control system
- Television broadcasting equipment
- Non-polarized electrodes
- earphone
- Power control
- Communication
- High gain DC amplifier
- Portable docking station
- Power transmission
