ADA4932-1YCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 16MOhm |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADA4932 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 9.6mA |
| Supply Current-Max | 5mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 3V~11V ±1.5V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 560MHz |
| Gain Bandwidth Product | 1 GHz |
| Differential Output | YES |
| Voltage Gain | 66dB |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Output Polarity | COMPLEMENTARY |
| Settling Time | 9 ns |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Negative Supply Voltage-Nom | -5V |
| Out Swing-Min | 3.2 V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4932-1YCPZ-R7 Overview
In the package, you will find a 16-VFQFN Exposed Pad, CSP-case to contain the op amp ic. An op amp of this type is a Differential-type. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 16 terminations have been reported in the past few weeks. The pins on this board total to 16 in total. Please take in mind that op amp should be run at 5V. In total, the buffer amplifier consists of 16 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~105°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 9.6mA, this op amp ic can operate. Keeping the voltage gain at 66dB is the best course of action. This op amp contains 1 circuits. Buffer op amp is equipped with 1 channels on the device. Linear amplifier resistance should stay within the range of 16MOhm. Interface ICs of the electronic ic chip can be classified as LINE DRIVER types.
ADA4932-1YCPZ-R7 Features
16 Pins
supply voltage of 5V
66dB voltage gain
Resistance of 16MOhm
ADA4932-1YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4932-1YCPZ-R7 Instrumentational OP Amps applications.
- Precision measurement
- Vehicle electronics
- Comparator
- Mobile phone
- Differentiator circuits
- Ultrasound transducers
- Medical instruments
- Band-pass filter
- Scintillation detectors
- Fission chambers
