ADA4939-1YCPZ-R2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 450kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4939 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 36.5mA |
| Nominal Supply Current | 37.7mA |
| Slew Rate | 6800V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 3V~5.25V ±1.5V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 2.8mV |
| Differential Output | YES |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset | 500μV |
| -3db Bandwidth | 1.4GHz |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4939-1YCPZ-R2 Overview
The linear amplifier is packaged in a 16-VFQFN Exposed Pad, CSP case. An op amp ic of the Differential type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 16. In this case, there are 16 pins on the board. This linear amplifier should be powered by an 5V battery. It has 16 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2.8mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~105°C . It is possible to operate this buffer amplifier from a supply current of 36.5mA . The op amp is rated for an operating supply voltage of 1. The operating supply voltage of the buffer op amp is rated at 5V. It is recommended to keep the buffer amps resistance within the range of 450kOhm. The interface IC type of this electronic part are classified as LINE DRIVER.
ADA4939-1YCPZ-R2 Features
16 Pins
supply voltage of 5V
Resistance of 450kOhm
ADA4939-1YCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4939-1YCPZ-R2 Instrumentational OP Amps applications.
- Proportional operation circuits
- Industrial control system
- Scintillation detectors
- Division circuits
- High-frequency data acquisition systems
- Signal filtering
- Portable electronic products powered by batteries
- Industrial applications including automation
- High gain DC amplifier
- pH (acidity)
