ADA4940-2ACPZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50MOhm |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4940 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Test Frequency | 50kHz |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1.25mA |
| Quiescent Current | 1.25mA |
| Slew Rate | 95V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 1.1μA |
| Voltage - Supply, Single/Dual (±) | 3V~7V |
| Output Current per Channel | 46mA |
| Input Offset Voltage (Vos) | 60μV |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Supply Voltage Limit-Max | 8V |
| -3db Bandwidth | 260MHz |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4940-2ACPZ-R2 Overview
A 24-WFQFN Exposed Pad, CSP case is used to package the op amp. This is a Differential type op amp. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 24h termination of the year. Buffer amplifier has a total of 24 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 24 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 60μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.25mA and 10 . The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 5V voltage. 1.25mA quiescent currents are flowing through buffer op amp. 50MOhm should be the range of resistance for the linear amplifier.
ADA4940-2ACPZ-R2 Features
24 Pins
supply voltage of 5V
Resistance of 50MOhm
ADA4940-2ACPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4940-2ACPZ-R2 Instrumentational OP Amps applications.
- RF cable systems
- Proportional operation circuits
- Voltage regulation circuit
- Portable electronic products powered by batteries
- Professional videography
- Weak signal detection
- Polarized electrodes
- Thermocouples
- Blood pressure sensors
- Micro signal measurement
