ADA4941-1YCPZ-R7
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 30MHz |
| Gain Bandwidth Product | 32MHz |
| Differential Output | YES |
| Voltage Gain | 6.06dB |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Settling Time | 980 ns |
| Input Characteristics | DIFFERENTIAL |
| -3db Bandwidth | 30MHz |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Input Bias Current | 4.5μA |
| Number of Amplifiers | 1 |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 24MOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Data Acquisition |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4941 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 25mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 22 V/μs |
| Common Mode Rejection Ratio | 84 dB |
| Max Input Voltage | 12V |
| Output Current per Channel | 25mA |
ADA4941-1YCPZ-R7 Overview
The package that this product comes in is called a Tape & Reel (TR) package.It is an excellent ADC Driver that is very good value for the money you are paying for it.Dispatched with the 8-WFDFN Exposed Pad, CSP package.There is a mounting of the part in the Surface Mount direction.Data Acquisition is mainly where it finds its use.Here's the ADA4941 part number.For the purposes of amplification, 1 functions are used here to access high performance.During peak relow, it is crucial that the iron temperature is kept under control by adjusting 260, which increases the iron temperature.As a result, there are a total of 8 pins on the part.A supply voltage of 3V is recommended for this amplifier to operate properly.A 8-pin amplifier suitable for custom applications.A device can operate at a temperature as low as -40°C.The impressive thing about this part is that it can operate under temperatures as high as 125°C.Surface Mount offers greater design flexibility with this product.The maximum supply voltage that it is rated for is 12V.A minimum power of 2.7V is provided.6.06dB represents the amplifier's voltage gain, which is excellent.Resistance 24MOhm is specified for this amplifier.Setting the supply current to 2.3mA maintains normal operation of the amplifier.-3db bandwidth performance is 30MHz for this device.In order to achieve efficient amplification, 2 elements are used.
ADA4941-1YCPZ-R7 Features
ADA4941-1YCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4941-1YCPZ-R7 Special Purpose Amplifiers applications.
- Displayers for aircraft and air transportation control systems
- Test and measurement instruments
- Portable media players
- Proportional counter tubes
- pH (acidity)
- Automatic control
- Ultrasound transducers
- Large motor controllers
- Logarithmic and exponential operation circuits
- Signal operation
