ADA4941-1YRZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 24MOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Data Acquisition |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4941 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 2.3mA |
| Slew Rate | 22 V/μs |
| Common Mode Rejection Ratio | 84 dB |
| Input Offset Voltage (Vos) | 5V |
| Bandwidth | 30MHz |
| Gain Bandwidth Product | 30MHz |
| Differential Output | YES |
| Voltage Gain | 6.06dB |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Input Characteristics | DIFFERENTIAL |
| -3db Bandwidth | 30MHz |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Input Bias Current | 4.5μA |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4941-1YRZ-RL Overview
The package contains a Tape & Reel (TR) value.There is no doubt that this ADC Driver is a very good value for the price.In order to use the 8-SOIC (0.154, 3.90mm Width) package, you will need the following.The part is mounted in the Surface Mount.Data Acquisition is its main application.This device has the base part number ADA4941.The 1 functions here are used for amplification purposes due to their high performance.It is estimated that there are 8 terminals in total, each of which has its own function.Under 260, the iron temperature should be controlled when relowing the part at peak.8 pins make up the total number of pins on the part.It is recommended that a supply voltage of 3V is used to run this amplifier fully.A 8-pin amplifier for your custom needs.A device can operate at a temperature as low as -40°C.A remarkable characteristic of this part is that it can run at a temperature as high as 125°C, which is extremely high.In order to enhance design flexibility, Surface Mount has been incorporated into this product.It is rated for 12V maximum supply voltage.It is supplied with at least 2.7V watts of power.As a result of combining 1 channels, this video processing device is able to deliver amazing performance.9V can be used as a supply for this device.It has a very good voltage gain of 6.06dB.Specified 24MOhm resistance is present in this amplifier.It is recommended that the amplifier's supply current be set to 2.3mA to keep it functioning normally.The -3db bandwidth performance of this device is 30MHz.Amplification is achieved by combining 2 basic elements.
ADA4941-1YRZ-RL Features
ADA4941-1YRZ-RL Applications
There are a lot of Analog Devices Inc. ADA4941-1YRZ-RL Special Purpose Amplifiers applications.
- Fission chambers
- High input resistance broadband
- Polarized and non-polarized electrodes
- Power transmission
- Voltage regulation circuit
- Signal operation
- Displayers for aircraft and air transportation control systems
- Inverse/same-phase proportional circuit
- Television broadcasting equipment
- single/dual op amp sum and difference circuits
