ADAU1328BSTZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 192kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADAU1328 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Interface | I2S, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 56mA |
| Number of Bits | 24 |
| Quiescent Current | 74mA |
| Data Interface | Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 96 dB |
| Number of D/A Converters | 8 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 8 |
| Dynamic Range, ADCs / DACs (db) Typ | 105 / 106 |
| S/N Ratio, ADCs / DACs (db) Typ | 94 / 94 |
| Height | 1.45mm |
| Length | 7.2mm |
| Width | 7.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADAU1328BSTZ Overview
In order to save space, it is packaged in the 48-LQFP package. Tray packaging method is used. Its General Purpose type ensures high-efficiency performance in a range of applications. As a mounting type, it uses Surface Mount. When the operating performance is set to -40°C~85°C, it is able to operate normally. It consists of 2 / 8 ADCs/ DACs. An analog circuit is supplied with a voltage of 3V~3.6V. It is supplied with a voltage of 3V~3.6V to power the digital circuit. The transmission line is terminated with 48 terminations to prevent reflection of signals. The device has 48 pins. There are 48 pins on this board. Using its base part number ADAU1328, it can be used to locate parts that are related. It is mounted to a PCB based on the Surface Mount technology. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. It is possible to convert analog signals into digital signals using 2 A/D converters. Supply voltage should be maintained at 3V. It operates on a supply voltage of 3.3V. It is able to operate from the supply voltage of 3.3V. Digital signals are converted into analog signals using 8 D/A converters. 24 bits are used to store information. A normal electrical current of 56mA should flow through the circuit at all times. If external factors are not present, 74mA current is consumed.
ADAU1328BSTZ Features
Embedded in the 48-LQFP package
Operating temperature of -40°C~85°C
2 / 8 ADCs / DACs
2 A/D converters
ADAU1328BSTZ Applications
There are a lot of Analog Devices Inc. ADAU1328BSTZ CODECs Interface ICs applications.
- RF-based home automation system
- Conveying
- Linear measurement
- Data distribution
- Translating the decimal values to the binary
- Motor speed /RPM readout
- Spooling or level wind
- Speed synchronization of multiple motors in industries
- Digital systems
- Image search
