ADAU1772BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad, CSP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADAU1772 |
| Pin Count | 40 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 1.11.8V |
| Interface | I2C, I2S, SPI, Serial |
| Min Supply Voltage | 1.045V |
| Data Interface | I2C, SPI |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 1.8V~3.3V |
| Voltage - Supply, Digital | 1.1V~1.8V |
| Number of A/D Converters | 4 |
| Signal to Noise Ratio (SNR) | 102 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 24 b |
| Number of GPIO | 7 |
| Sigma Delta | No |
| Number of ADCs / DACs | 4 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 102 / 104 |
| S/N Ratio, ADCs / DACs (db) Typ | 102 / 107 |
| Height | 750μm |
| Length | 6.1mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADAU1772BCPZ Overview
For space-saving reasons, it is supplied in a 40-WFQFN Exposed Pad, CSP package. We have adopted the packaging method of Tray. Due to the fact that this part is of the type General Purpose, it is capable of delivering high-efficiency performance in a wide range of applications. As a mounting type, it uses Surface Mount. Using -40°C~85°C as the operating performance allows it to operate normally. 4 / 2 ADC / DAC is integrated into it. The analog circuit is provided with the supply voltage of 1.8V~3.3V. 1.1V~1.8V provides the supply voltage to the digital circuit. The transmission line is terminated with 40 terminations to prevent reflection of signals. This is a 40-pin electronic device. There are 40 pins on this board. The base part number ADAU1772 can be used to find related parts. Using Surface Mount technology, it is mounted to a PCB. There are 4 A/D converters used to convert the analog signals into digital signals. Electronic parts classified as Other Consumer ICs are located in this subcategory. It is recommended that the supply voltage is maintained at 1.045V. Power supplies of 1.11.8V are used. It is able to operate from the supply voltage of 3.3V. Digital signals are converted into analog signals with 2 D/A converters. It supports a maximum supply voltage of 3.63V.
ADAU1772BCPZ Features
Embedded in the 40-WFQFN Exposed Pad, CSP package
Operating temperature of -40°C~85°C
4 / 2 ADCs / DACs
4 A/D converters
ADAU1772BCPZ Applications
There are a lot of Analog Devices Inc. ADAU1772BCPZ CODECs Interface ICs applications.
- Flight simulators
- Digital systems
- Wire number reduction in application that have multiple inputs
- Autonomous vehicles & robots
- Mobile equipement
- Automatic health monitoring systems
- Microprocessor
- Speed synchronization of multiple motors in industries
- Off-Highway Vehicles (OHV)
- Servo motors
