ADC0804LCWM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 875mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | ADC0804 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 6.3V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 875mW |
| Number of Bits | 8 |
| Supply Current-Max | 2.5mA |
| Input Type | Differential |
| Architecture | SAR |
| Supply Type | Single |
| Reference Type | External, Supply |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 10 ksps |
| Voltage - Supply, Analog | 4.5V~6.3V |
| Voltage - Supply, Digital | 4.5V~6.3V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 10k |
| Output Bit Code | BINARY |
| Power Consumption | 5.5mW |
| Linearity Error-Max (EL) | 0.3906% |
| Conversion Rate | 10 ksps |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADC0804LCWM/NOPB Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 10k Hz.The input type of this electronic AD converter is Differential.There are External, Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 4.5V~6.3V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC0804 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply that can be categorized according to Single.The supply/digital voltage of this electrical AD converter is 4.5V~6.3V.Surface Mount can be used to mount the AD converter on the wall.The ADC converter operates with the maximal supply voltage of 6.3V.It operates with the minimal supply voltage of 4.5V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 875mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 875mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 10 ksps.The maximal supply current amounts to 2.5mA.
ADC0804LCWM/NOPB Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.5V
5V power supplies
ADC0804LCWM/NOPB Applications
There are a lot of Texas Instruments ADC0804LCWM/NOPB ADC applications.
- Spectrum Analysis
- Instrumentation and test equipment
- Audio/Video devices
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Medical Instrumentation and medical imaging
- 3-phase power control
- Micro and pico cell systems, software radios
- Wireless and wired broadband communications
- In-building wireless telephony
- Uninterrupted Power Supplies
