ADC08D500CIYB/NOPB
| Parameters | |
|---|---|
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 2W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.9V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADC08D500 |
| Pin Count | 128 |
| Operating Supply Voltage | 1.9V |
| Polarity | Bipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 2 |
| Interface | LVDS, Parallel, Serial |
| Max Supply Voltage | 2V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 561mA |
| Power Dissipation | 1.4W |
| Number of Bits | 8 |
| Input Type | Differential |
| Architecture | Folding Interpolating |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Single |
| Reference Type | Internal |
| Data Interface | LVDS - Parallel |
| Resolution | 1 B |
| Sampling Rate | 500 Msps |
| Voltage - Supply, Analog | 1.8V~2V |
| Voltage - Supply, Digital | 1.8V~2V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 500M |
| Output Bit Code | OFFSET BINARY |
| Power Consumption | 1.4W |
| Linearity Error-Max (EL) | 0.3516% |
| Integral Nonlinearity (INL) | 0.9 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 500 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 0.95V |
| Signal to Noise Ratio (SNR) | 48 dB |
| Differential Nonlinearity | 0.6 LSB |
| Height | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP Exposed Pad |
| Number of Pins | 128 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | 3A991.C.1 |
ADC08D500CIYB/NOPB Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 128-LQFP Exposed Pad package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 128 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.9V.The A/D converter has 2 channels.The is equipped with 128 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500M Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Folding Interpolating.There are 128 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.8V~2V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC08D500 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single describes the type of supply.The supply/digital voltage of this electrical AD converter is 1.8V~2V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 2V.It operates with the minimal supply voltage of 1.8V.This electrical digital converter operates from a supply voltage of 1.9V.The maximal analog input voltage of this electrical AD converter is 0.95V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 1.4W. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 2W.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 500 Msps.Simultaneous Sampling can be ensured when operating.
ADC08D500CIYB/NOPB Features
1 Functions
128 basic kinds of terminations
128 pin count
Minimal supply voltage of 1.8V
ADC08D500CIYB/NOPB Applications
There are a lot of Texas Instruments ADC08D500CIYB/NOPB ADC applications.
- Imaging Systems
- Communication test equipment
- Multicarrier, multimode digital receivers
- Digital signal processing
- High Speed Data Acquisition for PCs
- Communication Systems
- Industrial Process Control
- In-building wireless telephony
- CMOS Image sensors for mobile applications
- Smart antenna systems
