ADC101S021CIMF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | ADC101S021 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 10 |
| Supply Current-Max | 2.4mA |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | Supply |
| Data Interface | SPI, DSP |
| Resolution | 1.25 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 200k |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 0.7 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 200 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 61.6 dB |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADC101S021CIMF/NOPB Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the SOT-23-6 package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 6 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 6 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC101S021 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 200 ksps.The maximal supply current amounts to 2.4mA.
ADC101S021CIMF/NOPB Features
1 Functions
6 basic kinds of terminations
Minimal supply voltage of 2.7V
ADC101S021CIMF/NOPB Applications
There are a lot of Texas Instruments ADC101S021CIMF/NOPB ADC applications.
- 3-phase power control
- In-building wireless telephony
- Microcontrollers.
- Industrial Process Control
- Digital signal processing
- High Speed Data Acquisition
- Scientific instruments
- Medical Imaging
- Cell Phones
- Smart antenna systems
