ADC104S021CIMM
| Parameters | |
|---|---|
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | Supply |
| Data Interface | SPI, DSP |
| Resolution | 1.25 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 200k |
| Output Bit Code | BINARY |
| Power Consumption | 1.94mW |
| Linearity Error-Max (EL) | 0.0293% |
| Integral Nonlinearity (INL) | -0.4 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Number of A/D Converters | 1 |
| Conversion Rate | 200 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 61.8 dB |
| Differential Nonlinearity | 0.4 LSB |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 9.5mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADC104S021 |
| Pin Count | 10 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 4 |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.3mA |
| Number of Bits | 10 |
| Input Type | Single Ended |
ADC104S021CIMM Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 4 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC104S021 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Surface Mount can be used to mount the AD converter on the wall.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 9.5mW.The number of channels is growing strong/weak: 4.The conversion rate of this electrical AD converter is calculated as 200 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The ADC converter consists of 1 elements.
ADC104S021CIMM Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
1 elements
ADC104S021CIMM Applications
There are a lot of Texas Instruments ADC104S021CIMM ADC applications.
- High Speed Data Acquisition
- Uninterrupted Power Supplies
- Digital Storage Oscilloscope
- Wireless local loop
- Medical Instrumentation and medical imaging
- Communication Systems
- Music recording
- Multicarrier, multimode digital receivers
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Digital beam-forming systems for ultrasound
