ADC10D1000CIUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 292-BGA |
| Number of Pins | 292 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e0 |
| Feature | Simultaneous Sampling |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 292 |
| ECCN Code | 3A001.A.5.A.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 3.7W |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 1.9V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADC10D1000 |
| Pin Count | 292 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.9V |
| Polarity | Bipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 2 |
| Interface | LVDS, Parallel |
| Max Supply Voltage | 2V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 2.77W |
| Number of Bits | 10 |
| Supply Current-Max | 985mA |
| Input Type | Differential |
| Architecture | Folding Interpolating |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Analog, Digital |
| Reference Type | Internal |
| Data Interface | LVDS - Parallel |
| Resolution | 1.25 B |
| Sampling Rate | 1 Gsps |
| Voltage - Supply, Analog | 1.8V~2V |
| Voltage - Supply, Digital | 1.8V~2V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 1G |
| Power Consumption | 2.77W |
| Linearity Error-Max (EL) | 0.1367% |
| Integral Nonlinearity (INL) | 1.4 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 1 Gsps |
| Ratio - S/H:ADC | 1:1 |
| Output Format | PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 57 dB |
| Analog Input Voltage-Min | -0.8V |
| Height | 2.4mm |
| Length | 27mm |
| Width | 27mm |
| Thickness | 2.38mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADC10D1000CIUT Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 292-BGA package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 292 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.9V.The A/D converter has 1 channels.The is equipped with 292 pin count.The peak reflow temperature (Cel) amounts to 220 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 1G Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Folding Interpolating.There are 292 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.8V~2V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC10D1000 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 1.8V~2V.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 2V.It operates with the minimal supply voltage of 1.8V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.9V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.77W. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3.7W.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 1 Gsps.The minimal analog input voltage of this electrical AD converter is -0.8V.Simultaneous Sampling can be ensured when operating.The maximal supply current amounts to 985mA.
ADC10D1000CIUT Features
1 Functions
292 basic kinds of terminations
292 pin count
Minimal supply voltage of 1.8V
ADC10D1000CIUT Applications
There are a lot of Texas Instruments ADC10D1000CIUT ADC applications.
- Displaying
- Handheld Terminal Interface
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- CMOS Image sensors for mobile applications
- Microcontrollers.
- Multiplexed Data Acquisition Systems
- Battery Operated Systems
- 4-channel data acquisition
- Telecommunications
- RADAR processing, digital oscilloscopes
