ADC10DV200CISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 60-WFQFN Exposed Pad |
| Number of Pins | 60 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 60 |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADC10DV200 |
| Pin Count | 60 |
| Operating Supply Voltage | 1.8V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 2 |
| Interface | LVDS, Parallel |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Nominal Supply Current | 160mA |
| Number of Bits | 10 |
| Input Type | Differential |
| Architecture | Pipelined |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | LVDS - Parallel, Parallel |
| Resolution | 1.25 B |
| Sampling Rate | 200 Msps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 65M |
| Power Consumption | 450mW |
| Linearity Error-Max (EL) | 0.0898% |
| Integral Nonlinearity (INL) | 0.92 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 200 Msps |
| Ratio - S/H:ADC | 1:1 |
| Output Format | PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 59.9 dB |
| Differential Nonlinearity | 0.43 LSB |
| Analog Input Voltage-Min | -1.5V |
| Height | 800μm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADC10DV200CISQE/NOPB Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 60-WFQFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 60 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 2 channels.The is equipped with 60 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 65M Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 60 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC10DV200 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 3V~3.6V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 200 Msps.The minimal analog input voltage of this electrical AD converter is -1.5V.Simultaneous Sampling can be ensured when operating.
ADC10DV200CISQE/NOPB Features
1 Functions
60 basic kinds of terminations
60 pin count
Minimal supply voltage of 1.7V
ADC10DV200CISQE/NOPB Applications
There are a lot of Texas Instruments ADC10DV200CISQE/NOPB ADC applications.
- Uninterrupted Power Supplies
- AC motor control
- Communication Systems
- Medical Imaging
- Wireless local loop
- Communication test equipment
- Digital beam-forming systems for ultrasound
- Music recording
- Telecommunications
- TD-SCDMA, WiMAX
